Available Size: Pad : 150 mm. x 225 mm.
Minimum Order Qty. Pad-1 Box (100 Pads

Available Size: 150 mm. x 100 meters
Minimum Order Qty. 1 Roll

Available Size: 150 mm. x 100 meters
Minimum Order Qty. 1 Roll

Superior finish : "Valgro-Fynex" flap brushes are uses for finishing curved and irregular shaped parts and with hares to reach areas. They offer great degree of conformability and provide even pressure for uniform surface finishing. Long scratch pattern on softer materials such an aluminium, plastic, Wood. Non-ferrous metal.

They remove debits and contamination from surface to create a clean surface for coating operation. And they provide a consistent satin scratch pattern and other cosmetic finished to improve surface appearance.

Superior finish :
Spindle mounted mops are manufactured from closely packed of Valgro material arranged radially around a resin core and bonded to a steel spindle.

General Application :

"Valgro-Fynex" spindle mounted mop wheels are designed for use with air and electric hand tools as well as small bench grinder, they are ideal for small scale cleaning and deburring. Especially useful for cleaning and deburring normally inaccessible areas. "Valgro-Fynex" Mops are generating high-density scratch finishes on all type of metal surfaces.

Suitable Machine :

Portable power or pneumatic tools of various type with collets fixing, drill.

High Rate of Cut, Provide Uniform Scratch Pattern :

"Valgro-Fynex" combi/interleaved Mop wheels are manufactured from closely packed strips of Valgro material with the addition of a flap of coated abrasive between each layer. The interleaved flaps are then radially to a resin core and mounted on a spindle.

Specific application :

 Removing paint and conditioning surface on aircraft, boats, garage door, windows, etc.
Debarring and satin finishing hard metals
Weld removal and blending-in
Removing heavy dirt and oxide before plating and painting.
Heavy-duty cleaning inside cooling coils, pipes and tubing
Light sanding of wood before lacquer.
Cleaning Stainless steel
Debarring stamped and routed aluminium parts.
Deburring and grains finishing stainless steal sheets after conventional coated abrasives.
Satin finish on large surface.

High Rate of Cut, Provide Uniform Scratch Pattern :

"Valgro-Fynex" Combi Flap wheels are manufactured from closely packed strips of Valgro heavy duty material with the addition of a coated abrasive strip between each layer. The Valgro materials between the layers of coated abrasive provide a resilient backing that eliminates the layover effect encountered with conventional abrasives flap wheel.

The Valgro-Fynex metal surface combination system is the most versatile method for all applications where a linear scratch pattern required with reduces finishing cost. Whether you work in stainless steel, steel, aluminum, brass, copper or other alloys.

Interleaved Flap Brush are designed for electric hand tool as well as small bench grinder Automatic & Semi Automatic machinery such as pedestal grinders, polishing lathes, centreless grinders, drill motor, shaft grinders, Coil cleaning machines, Rotary machines, Straight line machines & Robotic equipment.

Specific application :

 Removing paint and conditioning metal surface.
 Weld removal and blending-in
 Removing heavy dirt and oxide before welding and painting on pipes and tubing
 Light sanding of wood before lacquer.
 Grains finishing stainless steel sheets after conventional coated abrasives.
 Hairline finish on large surface

An Excellent starting point for New Generation requirement of medium to heavy Deburring. VXL deburring and Finishing wheels

Made with Valgro-Fynex Heavy duty Impregnated Nylon fiber abrasives material wind on a resin core and bonding with together with high compress technology. Specially designed for medium to heavy deburring, High finishing and polishing effect on solid metal surface. We have three qualities of convolute wheels.

Cut N polish wheels : Light cutting as well as finishing of machining line, this will specialty designed for micro stock removal, 2 to three micron stock removal capacity. Suitable for rough grind line finishing, coated abrasives scratch blending, surgical and orthopedic implants wire cut parts finishing etc.

8A medium Deburring wheels : This is suitable for all general purpose application, It is best against 3M 8AMED. Wheels more cutting action and faster finishing rate.

ZM Blue polish wheels : When customer require high finish in final finishing operation this is most suitable.

Typical User :
Manufacturers :

Aerospace component manufacturers: Blades, Vanes, Rotors, Housings, Fasteners, Airframe Parts, Extrusion, Control Surface, Rocket Cans, Nozzles, Valves, Etc. 

Other Manufacturers : A Hand tools, Builder and Furniture hardware, Machinery Instrument, Surgical Instrument, Engines and Components, Formed wire products, Aluminum extruders, Automobiles Equipment,

Ideal for Aggressive Cleaning : of Welds or Metal, Concrete, Wall and wooden surface, General plant maintains

Ideal for removal of coatings : Such as Varnish, Paint, Gasket, light weld spatter, etc.

Strip-cut is made from nylon fibers impregnated with coarse carbide grains and reinforced with epoxy coating. This combination produce an abrasive web material that is sharp, non-loading and flexible, making an ideal abrasive for effective surface cleaning. 

Due to a unique open web design, Strip-cut removes only the top "skin" layer of the workpiece without grinding off nor cutting into the surface area. This web construction also allows for cooler grinding, preventing burn marks on surface area.

Usage of this versatile abrasive wheel is common in marine dockyards, Maintenance in plant, car repair workshops, metal fabrication and stainless steel factories.

Its applications are mainly for surface conditioning, blending, weld splatter cleaning, removal of rust, scales, dirt gasket and paint stripping.

Active Prevent of Undercutting & Gouging :

"Valgro-Fynex" Unitized mop & Wheel are made from the high durability unitized material, It can shaped or profiled for the finishing and debUrring of precision parts and are perfect for those difficult to reach areas. That will improve the quality of finishing on any Metal without smearing.

Application : 

Deburring and blending requires high RPM
Decorative finishing requires low RPM
Polishing requires high speeds and low pressure

Deburring : 

Aluminum die cast flashing
Radius edges on precision machined parts
Wire edges from surgical instalment i Gears & aircraft wing spares
Trailing and leading edge on turbine blades
Breaking edge on aluminum extrusions

Blending : 

Blending and refining surface of jet blade airfoils.
Blending Parting lines from casting parts / wrist watch case
Polishing weld on Stainless Steel Job
Removing minor pits, resin and adhesive over spray
Removing punched hole burrs & coated abrasives scratch 120 grit

Perceptible Quality Enhancement in Cleaning / Finishing operation

"Valgro-Fynex" Wide face brushes made from Valgro heavy duty nonwoven material with high compress designe for large area surface preparation. They are ideally suited for flat surface. They provide uniform hairline finish, satin and matt finish on ferrous and Non-ferrous metal surface. They can use wet and dry application. Valgro-Fynex Brushes can allow you to use less chemical and heat with improve your surface cleanliness, Worker safety improves and waste disposal is reduced. Brushes can be used in solution with a ph of 2-10 on cleaning line.

Application : 
Metal Strips Industries "Valgro-Fynex" Wide face brushes are ideally suited for flat surface. They provide uniform hairline finish, satin and matt finish on ferrous and Non-ferrous metal surface.

Performance Highlights : 
Remove debris and contamination from surface to create a clean surface, generate a consistent anchor pattern to improve the surface for better coating adhesion. 

Improve the surface appearance. Provide a consistent satin scratch pattern and other cosmetic finishes.

all of these advantage increase productivity and reduce costs.

Angle Discs: Suitable Machine : Power & pneumatic Angle grinder.

Plain Discs: Suitable Machine : Portable power/pneumatic tools with collets fixing, drill Straight shaft grinder.

For smooth and gleaming metal surface :

Focus Area : SS Fabrication Industries

The Valgro-Fynex metal surface finishing system is the most versatile method for all applications where a linear scratch pattern required with reduce finishing cost. Whether you work in stainless steel, steel, aluminium, brass, copper or other alloys. Mostly prefer by stainless steel kitchen equipment, Pharmaceutical machinery mfg., Dairy & Ice-cream equipment, food processing equipment, architectural fabricators.

kombi Metal Surface Finish brush :

This is a Firm, coarse Nonwoven flap and Coated strip for tough cleaning, graining and scratch blending application. Produce a satin line finish kombi Metal Surface Finish brush.

Optimal Answers to Light Deburring & Finishing Challenges :

Heavy Duty "Valgro-Fynex" Disc can also be ganged-up on a shaft to form mops and brushes, The density of the ganged-up product can be varied to suit the user by either incorporation spaces or varying the number of actual discs. This makes the end product extremely versatile.

General Application : 

Deburring, Polishing, Cleaning, and Blending : Inside diameter cleaning & Finishing of lifter bores, valve bodies, break cylinder, piston cylinder etc.
Two discs per set face same direction for push and pull operation
Used for same operation as the slotted discs, however, due to the multiple discs per set offer a firmer, more aggressive discs.
Effective on all steels, rubber, plastic and composites. It is used for irregular shape like gear Deburring, Slot finishing, Key way Deburring.

Specific Application : 

 Light deburring with power tools
Patterning steel fabrication using air and electric tools.
Used for glazing cutlery, finishing, deburring and removing discoloration caused by heat treatment.
Fitted to an orbital sander to finish aluminum bonnet before the final coat of paint.

Suitable Machines : 
Flexible & Straight Shaft Grinder Bench Motor, Pedestal Grinder, Orbital Sander.

PRINTED CIRCUIT CLEANING BRUSH :

Consists of "Valgro-Fynex" Material compressed on to a core for use on printed circuit cleaning and scrubbing machine and are ideals for all cleaning operations. The PCB used in the electronics industries are getting smaller and lighter with demand for higher performance, greater reliability, higher density, finer patterns and multi-layer constructions have changed the methods and material used to make PCB. It demands proper surface conditioning for every step of the manufacturing process.

Application : 

Cleaning heavy oxide from laminate
Cleaning prior to dry film resist
Cleaning prior to electroless copper plate
Surface conditioning after electrolytic plated copper
Surface conditioning before solder application
Surface conditioning after resist removal
Cleaning before assembly soldering
Surface conditioning before printing on the backside

Surface Conditioning Spiro-Bands :

Surface Conditioning Spiro-Bands are designed to complement the Valgro Heavy duty surface conditioning material provides a high intial rate of cut, resulting in a faster finishing / removal rate they are effective tools for blending and finishing flat and contoured surfaces.